8:00am – 5:00pm, Monday – Friday

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Trajan 916

Variable Speed Metal Cutting Band Saw

All 916 band saws are well-suited to typical job shops, small fabricators, and tool rooms because of their 9 inch by 16 inch cutting capacity. But the Trajan 916 ups the ante on all other 916 saws. It’s a manual, pivot band saw that can handle production environments with ease. When run with a carbide-tipped band saw blade, it can handle extremely hard metals, like nickel alloys and aerospace steels. The Trajan 916 also drastically improves the life of your band saw blade.

Structural Strength

Trajan started with the very essentials when engineering this saw. A two horse power motor means the Trajan 916 has substantially more power and a strong, sturdy frame. The high-quality ductile cast iron guide arms mean the Trajan 916 absorbs vibration extremely well. This feature also keeps the blade stable while you’re cutting, reducing wear and tear.

Protects Band Saw Blade Life

The Trajan 916 also has a carbide guide system with roller bearings as pre-guides. This feature reduce the vibration and prolong blade life. The guide system also ensures you can take full advantage of the Trajan 916’s cutting capacity for all variety of metals.

Opens Up Project Potential

The Trajan 916 offers saw operators more options. It comes standard with an infinitely variable blade speed pulley system, providing a range of speeds from 95 to 402 fpm. Until now, this type of blade speed control was only available on higher-priced production saws.

Operators also gain more control thanks to the Trajan 916’s heavy-duty cast base and saw vise. This combination enable operators to swivel the vise to cut up to 45 degrees in one direction.

Precise Cuts and Operator Safety

On other 916 saws, operators have to get the work piece close to the blade in order to measure for the cut. This practice can endanger saw operators and make accurate measurement difficult. To ensure more precise cuts and enhance saw user safety, the Trajan 916 has a laser guide. It assists in positioning the work piece and assuring correct measurement.

When band saws are easier to run, jobs are finished faster and more accurately. The down feed controls on the Trajan 916 separate feed and hold from descent rates, so you can achieve exact control over the saw head’s feed rate.

Increased Cutting Capability

All the upgrades to the Trajan 916 meant it needed a self-contained coolant system. This provides a constant and steady coolant flow, which increases cutting capabilities for harder materials and increases blade life. We recommend you use an AF 2000 semi-synthetic or AF 3000 full synthetic coolant.

Quick Clean Up

The Trajan 916 also has a chip brush standard in its design. The chip brush helps remove chips from the blade teeth and stores them in a chip box, which is easy to remove and clean out. The conveniences incorporated into the Trajan 916 help saw operators reduce and simplify clean-up time.

The variety of features and upgrades we’ve added to the 916 makes the Trajan a superior band saw. At Trajan, we make every machine better.

And of course all Trajan Band Saws run better with blades from Metal Sawing Technology, we are you single source for all of your band saw needs; Replacement Parts, Service on all machines, New Machines and the worlds finest blades, all at one place

High-Quality, Low-Cost Band Saw – 9″ x 16″ Variable Speed Metal Cutting Band Saw

  • Casting base and blade wheel jointed with heavy gauge steel saw head performs excellently with economic cost
  • Fully adjustable hydraulic downfeed controls the rate of descent
  • Control panel installed on top of saw head for more convenient operation
  • High efficiency variable speed pulley incorporates ease in changing speeds
  • Bearing carbide guide enhances cutting stability and extends the blade life
  • Cutting angle from 0 degree to 45 degree
  • Stand jointed with coolant pan for collecting chips and water
  • Coolant system for wet cutting
  • With bi-metal blade, chip brush and length stop set
  • Includes laser indicator and hydraulic tension meter
  • Table height 26″
0° Cutting Capacity Circle: 9″ Rectangle: 5″ x 16″
45° Cutting Capacity Circle: 9″ Rectangle: 8″ x 9 1/2″
Motor 1.5HP
Blade  Speed Ft/min 60HZ / 95-402 50HZ / 78-335
Blade Size L x W / 9′ 6″ x 1″
Dimensions inch L x W x H / 62.2 x 21.6 x 48.4
Net Weight / Gross Weight lbs 585 / 640
Shipping Size inch L x W x H / 63 x 24 x 49

Trajan band saws offer premium performance and long-term durability. Our line of machines ranges from portable, lightweight saws to powerful, heavy-duty machines.

Metal Sawing Technology offers the widest range of parts, products, sales and service you’ll find anywhere.

Featured Video

Sign up for our Newsletter

Enter your email to receive sawing tips and latest product news.

Request a Quote